Go down
avatar
Posts : 1
Join date : 2019-01-06
View user profile

Jon-e GI (Giant) Rebuild TIP.. Empty Jon-e GI (Giant) Rebuild TIP..

on Tue Jan 15, 2019 9:30 pm
OK I got a TIP for you when working on the Jon-E GI or (GIANT) I put the whole square of Platinum in the Big spring I got from John. I put the filled spring all the way to the top of the RED hood. Could not get it to start its reaction at ALL. I looked at my Standard Size Jon-E HW and at my Peacocks and at my Hong Kong HW and notice the Element is way closer to the cotton batting. So I moved the loaded spring in the Red Head on the Jon-E GI down to the bent in tabs. I put them tabs in the center of the spring. Spring can not go up or down. I did a slight pre heat and the thing is putting off A TON OF HEAT.
Admin
Admin
Posts : 21
Join date : 2018-11-22
Location : Banff, AB
View user profilehttp://www.mparam.com

Jon-e GI (Giant) Rebuild TIP.. Empty Re: Jon-e GI (Giant) Rebuild TIP..

on Fri Jan 18, 2019 8:08 pm
Until this, I've been recommending that users put the spring as far up as it will go in the head, I will no longer do that. Thanks for the info!
Back to top
Permissions in this forum:
You cannot reply to topics in this forum